T70-D is a high-performance relay output single-axis dual-channel digital tilt switch launched by Micro-Magic Inc Hi-Tech Company. The product has a measurement range of 0~±180° and two built-in relay output circuits. When the inclination angle value is greater than the preset alarm threshold, a non-inductive contact relay signal (driving current 1A) will be output, and the solenoid valve will be opened to perform corresponding hydraulic leg leveling. The alarm threshold is calibrated at the factory, and users can also set the alarm angle threshold by themselves.
零件编号 :
T70-D-AV订单（最小起订量） :
1leading time :
4Product Series and Parameters
| Parameter | Conditions | T70-D-AV | Unit |
| Measuring range | ±90 | ° | |
| Measuring axis | Y axis (optional) | X、Y axis | |
| Alam axis | Y axis (optional) | X、Y axis | |
| Frequency response | DC response | 100 | Hz |
| Resolution | Bandwidth 5Hz | 0.01 | ° |
| Accuracy | -40～85℃ | 0.1 | ° |
| Long term stability | -40～85℃ | 0.1 | ° |
| Power-on start time | 0.2 | s | |
| Output signal | Switching quantity (voltage) output RS232, TTL, RS485 optional at the same time |
||
| Average working hours | ≥55000 hours/time | ||
| Impact resistance | 3500g, 0.5ms, 3 times/axis | ||
| Anti-vibration | 10grms、10～1000Hz | ||
| Insulation resistance | ≥100MΩ | ||
| Waterproof level | IP67 | ||
| Cable | Standard 1.5 meter-length, wear-resistant, oil-proof, wide temperature, shielded cable 5*0.3mm2 | ||
| Weight | 150g (excluding packaging box) | ||
Production process
More similar products
Product dimension
Product size: L90*W40*H27MM
The default is to install horizontally upward: During installation, the sensor installation surface should be kept parallel to the measured target surface; please refer to the rotation diagram for the installation method. If other installation methods are required, please refer to the schematic description of "Product Installation Method" and make a note when ordering.
Application Scenarios
FAQ
T70-K是一款国产双轴四向四档倾斜角度开关，用于元件倾斜角度测量模块。它采用RTU Modbus协议，内部核心组件，包括MCU处理器、MEMS倾斜单元、电源电路、输出电路等，均为国产。旨在实现国产设备的制造，克服自主研发技术的障碍。
查看更多
T70-J 是国产双轴四向双向 倾斜角度开关 Micro-Magic公司生产的元件倾斜角度测量模块采用RTU Modbus协议，其内部核心组件包括MCU处理器、MEMS倾斜单元、电源电路、输出电路以及其他国产元件。该模块旨在制造国产设备，克服自主研发技术的障碍。
查看更多
T70-FA 是由 Micro-Magic Inc Hi-Tech 公司推出的高精度（0.01°）、小型化、低功耗、高一致性和稳定性的双轴四相四路倾斜开关。其工作温度可达工业级 -40℃。 ℃ -85 ℃开关动作点的报警阈值已在工厂校准。产品配备计算机调试软件，用户可自行设置开关动作点和触发延时。产品设计精密，再次补偿温度和线性度，集成了短路、瞬时高压、极性反转、浪涌等综合保护功能。
查看更多
T70-E 是一款高性能继电器输出 双轴单通道倾斜开关 本产品由Micro-Magic Inc.高科技公司推出。测量范围为0~±90°，内置两个继电器输出电路。当倾斜角度值大于预设报警阈值时，将输出一个非感性触点继电器信号（驱动电流1A），并打开电磁阀以进行相应的液压支腿调平。报警阈值已在工厂校准，用户也可自行设置报警角度阈值。
查看更多
T70-D 是一款高性能继电器输出 单轴双通道数字倾斜开关 本产品由Micro-Magic Inc.高科技公司推出。测量范围为0~±180°，内置两个继电器输出电路。当倾斜角度值大于预设报警阈值时，将输出一个非感性触点继电器信号（驱动电流1A），并打开电磁阀以进行相应的液压支腿调平。报警阈值已在出厂时校准，用户也可自行设置报警角度阈值。
查看更多留言
