The T7-C series is a new generation of digital small-volume MEMS inclination sensors launched by Micro-Magic Inc Hi-Tech Company. It has a built-in dual-channel earth gravity inclination unit that measures dynamic gravity acceleration and converts it into inclination angle changes. This allows measurement of the roll and pitch angles of the sensor output relative to the horizontal plane. It has output mode as RS232, RS485, RS422, Modbus, TTL level interface standard optional. Due to the built-in MCU control system, the linearity of the sensor output is corrected twice, which makes up for the decrease in accuracy caused by insufficient correction of the analog type.
零件编号 :
T7-C-CA订单（最小起订量） :
1测量轴 :
Dual-axis tilt monitoring (single-axis optional)高分辨率 :
0.05电压输入 :
DC+5V (9~36V can be customized)leading time :
4准确性 :
0.3保护级别 :
IP67 (IP68 can be customized)宽工作温度 :
-40～+85℃Product Series and Parameters
|
Parameter |
Conditions |
T7-C-10 |
T7-C-30 |
T7-C-60 |
T7-C-90 |
Unit |
|
Measuring range |
|
±10 |
±30 |
±60 |
±90 |
° |
|
Measuring axis |
|
X, Y |
X, Y |
X, Y |
X, Y |
|
|
Zero temperature drift |
-40～85° |
±0.05 |
±0.05 |
±0.05 |
±0.05 |
°/℃ |
|
Sensitivity temperature coefficient |
-40～85° |
≤200 |
≤200 |
≤200 |
≤200 |
ppm/℃ |
|
Frequency response |
DC response |
100 |
100 |
100 |
100 |
Hz |
|
Resolution |
Bandwidth 5Hz |
0.05 |
0.05 |
0.05 |
0.05 |
° |
|
Accuracy |
-40～85℃ |
0.2 |
° |
|||
|
Long term stability |
-40～85℃ |
<0.3 |
° |
|||
|
Power-on start time |
|
0.2 |
s |
|||
|
Response time |
|
0.01 |
s |
|||
|
Baud rate |
100K~500K bps can be set (others need to be customized) |
|||||
|
Output signal |
CAN |
|||||
|
Average working hours |
≥55000 hours/time |
|||||
|
Impact resistance |
3000g, 0.5ms, 3 times/axis |
|||||
|
Anti-vibration |
10grms、10～1000Hz |
|||||
|
Insulation resistance |
≥100MΩ |
|||||
|
Waterproof level |
IP67 |
|||||
|
Cable |
Standard 1.5 meter-length, wear-resistant, oil-proof, wide temperature, shielded cable 4*0.2mm2 |
|||||
|
Weight |
60g (excluding packaging box) |
|||||
Production process
More similar products
Product dimension
Product size: L55*W37*H24mm
The default is to install horizontally upward: During installation, the sensor installation surface should be kept parallel to the measured target surface; please refer to the rotation diagram for the installation method. If other installation methods are required, please refer to the schematic description of "Product Installation Method" and make a note when ordering.
Application Scenarios
FAQ
T7-D-DI 是 Micro-Magic 公司最新推出的升级版新一代小型 MEMS 数字倾斜传感器。它内置双通道地球重力倾斜单元，通过加速度计和动态陀螺仪的组合测量静态重力加速度和动态角速度，并将其转换为倾斜角度变化。因此，可以测量传感器输出相对于水平面的倾斜角和俯仰角。输出模式可选 RS232、RS485、RS422 或 TTL 电平接口标准。内置的 MCU 控制系统可对传感器输出线性度进行二次校正，补偿模拟型号因校正不足而导致的精度下降。本产品采用非接触式测量方式，可实时输出当前姿态倾斜角度。使用简便，无需拆卸安装两个相对位置发生变化的表面。是工业自动化控制和平台姿态测量的理想选择。本产品具有较强的抗外部电磁干扰能力，能够适应恶劣工业环境下的长期工作。
查看更多
T7-C系列是新一代数码小批量打印机 MEMS倾斜传感器 由Micro-Magic Inc.高科技公司推出。它内置双通道地球重力倾角测量单元，可测量动态重力加速度并将其转换为倾角变化。这使得可以测量传感器输出相对于水平面的横滚角和俯仰角。其输出模式可选RS232、RS485、RS422、Modbus和TTL电平接口。由于内置MCU控制系统，传感器输出的线性度经过两次校正，弥补了模拟式传感器因校正不足而导致的精度下降。
查看更多
T7-B系列是Micro-Magic Inc.公司生产的一款小型数字光伏跟踪器 倾角仪 该传感器单轴最大测量角度范围为360°，精度为0.3°，并具有3.3V TTL输出。由于内置MCU控制系统，传感器输出线性度经过两次校正，补偿了模拟模型因校正不足而导致的精度下降。采用非接触式测量原始量，可实时输出当前姿态倾角，安装简便，无需获取两表面相对变化。适用于工业自动化控制、风偏监测、倾角测量、水平调整、垂直监测和姿态记录；工程机械、测绘仪器等领域。
查看更多
T7-A系列是Micro-Magic公司推出的新一代数字小批量打印机。 倾斜传感器 由MXMW高科技公司推出。该产品内置双通道地球重力倾角测量单元，可测量动态重力加速度并将其转换为倾角变化。这使得传感器能够测量相对于水平面的横滚角和俯仰角。其输出模式可选RS232、RS485、RS422、Modbus和TTL电平接口。由于内置MCU控制系统，传感器输出的线性度经过两次校正，弥补了模拟式传感器因校正不足而导致的精度下降。
查看更多留言
