T7-D is a newly upgraded next-generation digital small volume MEMS tilt sensor launched by Micro-Magic Inc. It has a built-in dual channel earth gravity tilt unit and measures static gravity acceleration and dynamic angular velocity through a combination of accelerometers and dynamic gyroscopes, converting them into tilt angle changes. Thus, the tilt and pitch angles of the sensor output relative to the horizontal plane can be measured. Output modes RS232, RS485, RS422, or TTL level interface standards are optional. Built in MCU control system enables secondary correction of sensor output linearity, compensating for the accuracy decline caused by insufficient correction in analog models.
This product adopts non-contact measurement of raw materials and can output the current posture inclination angle in real time. It is easy to use and does not require retrieving the installation of two surfaces with relative changes. It is an ideal choice for industrial automation control and platform posture measurement. It has strong resistance to external electromagnetic interference and can adapt to long-term work in harsh industrial environments.
零件编号 :
T7-D-CA订单（最小起订量） :
1leading time :
4Product Series and Parameters
|
Parameter |
Conditions |
T7-D-10 |
T7-D-30 |
T7-D60 |
T7-D-90 |
Unit |
|
Measuring range |
|
±10 |
±30 |
±60 |
±90 |
° |
|
Measuring axis |
|
X, Y |
X, Y |
X, Y |
X, Y |
|
|
Zero temperature drift |
-40～85° |
±0.01 |
±0.01 |
±0.01 |
±0.01 |
°/℃ |
|
Sensitivity temperature coefficient |
-40～85° |
≤50 |
≤50 |
≤50 |
≤50 |
ppm/℃ |
|
Frequency response |
DC response |
100 |
100 |
100 |
100 |
Hz |
|
Resolution |
Bandwidth 5Hz |
0.01 |
0.01 |
0.01 |
0.01 |
° |
|
Accuracy |
-40～85℃ |
0.1 |
° |
|||
|
Long term stability |
-40～85℃ |
<0.12 |
° |
|||
|
Power-on start time |
|
0.2 |
s |
|||
|
Response time |
|
0.01 |
s |
|||
|
Baud rate |
100K~500K bps can be set (customization required for others) |
|||||
|
Output signal |
CAN |
|||||
|
Average working hours |
≥55000 hours/time |
|||||
|
Impact resistance |
3500g, 0.5ms, 3 times/axis |
|||||
|
Anti-vibration |
10grms、10～1000Hz |
|||||
|
Insulation resistance |
≥100MΩ |
|||||
|
Waterproof level |
IP67 |
|||||
|
Cable |
Standard 1.5 meter-length, wear-resistant, oil-proof, wide temperature, shielded cable 4*0.2mm2 |
|||||
|
Weight |
150g (excluding packaging box) |
|||||
Production process
More similar products
Product dimension
Product size: L55*W37*H24mm
Application Scenarios
FAQ
T7-D-DI 是 Micro-Magic 公司最新推出的升级版新一代小型 MEMS 数字倾斜传感器。它内置双通道地球重力倾斜单元，通过加速度计和动态陀螺仪的组合测量静态重力加速度和动态角速度，并将其转换为倾斜角度变化。因此，可以测量传感器输出相对于水平面的倾斜角和俯仰角。输出模式可选 RS232、RS485、RS422 或 TTL 电平接口标准。内置的 MCU 控制系统可对传感器输出线性度进行二次校正，补偿模拟型号因校正不足而导致的精度下降。本产品采用非接触式测量方式，可实时输出当前姿态倾斜角度。使用简便，无需拆卸安装两个相对位置发生变化的表面。是工业自动化控制和平台姿态测量的理想选择。本产品具有较强的抗外部电磁干扰能力，能够适应恶劣工业环境下的长期工作。
查看更多
T7-C系列是新一代数码小批量打印机 MEMS倾斜传感器 由Micro-Magic Inc.高科技公司推出。它内置双通道地球重力倾角测量单元，可测量动态重力加速度并将其转换为倾角变化。这使得可以测量传感器输出相对于水平面的横滚角和俯仰角。其输出模式可选RS232、RS485、RS422、Modbus和TTL电平接口。由于内置MCU控制系统，传感器输出的线性度经过两次校正，弥补了模拟式传感器因校正不足而导致的精度下降。
查看更多
T7-B系列是Micro-Magic Inc.公司生产的一款小型数字光伏跟踪器 倾角仪 该传感器单轴最大测量角度范围为360°，精度为0.3°，并具有3.3V TTL输出。由于内置MCU控制系统，传感器输出线性度经过两次校正，补偿了模拟模型因校正不足而导致的精度下降。采用非接触式测量原始量，可实时输出当前姿态倾角，安装简便，无需获取两表面相对变化。适用于工业自动化控制、风偏监测、倾角测量、水平调整、垂直监测和姿态记录；工程机械、测绘仪器等领域。
查看更多
T7-A系列是Micro-Magic公司推出的新一代数字小批量打印机。 倾斜传感器 由MXMW高科技公司推出。该产品内置双通道地球重力倾角测量单元，可测量动态重力加速度并将其转换为倾角变化。这使得传感器能够测量相对于水平面的横滚角和俯仰角。其输出模式可选RS232、RS485、RS422、Modbus和TTL电平接口。由于内置MCU控制系统，传感器输出的线性度经过两次校正，弥补了模拟式传感器因校正不足而导致的精度下降。
查看更多留言
