The T70-H is a dual axis digital tilt sensor by Micro-Magic Inc Hi-Tech Company, integrating industrial standard RTU Modbus and 0x68 hexadecimal protocols; Output RS232, RS485, RS422, TTL optional. Mainly targeting application markets with high limitations in volume, cost, and localization rate. Due to the built-in MEMS micro electromechanical production process tilt unit, it has a small volume, low power consumption, high consistency and stability, strong resistance to external electromagnetic interference, and strong ability to withstand impact and vibration. To manufacture domestically produced equipment and overcome technological barriers in independent research and development.
零件编号 :
T70-H-CA订单（最小起订量） :
1leading time :
4Product Series and Parameters
|
Parameter |
Conditions |
T70-H |
Unit |
|
Measuring range |
|
±180 |
° |
|
Measuring axis |
|
X axis |
|
|
Zero temperature drift |
-40～85℃ |
±0.05 |
° |
|
Sensitivity temperature coefficient |
-40～85℃ |
≤200
|
ppm/℃
|
|
Frequency response |
DC response |
100 |
Hz |
|
Accuracy |
-40～85℃ |
0.1 |
° |
|
Power-on start time |
|
0.2 |
s |
|
Response time |
|
0.01 |
s |
|
Baud rate |
100K~500K bps can be set (customization required for others) |
||
|
Output signal |
CAN2.0 , CANopen optional |
||
|
Average working hours |
≥55000 hours/time |
||
|
Impact resistance |
2600g, 0.5ms, 3 times/axis |
||
|
Anti-vibration |
10grms、10～1000Hz |
||
|
Insulation resistance |
≥100MΩ |
||
|
Waterproof level |
IP67 |
||
|
Cable wire |
Standard 1.5 meter-length, wear-resistant, oil-proof, wide temperature, shielded cable 4*0.3mm2 |
||
|
Weight |
55g (excluding packaging box) |
||
Production process
More similar products
Product dimension
Product size: L55*W37*H24MM
The default is to install horizontally upward: when installing, keep the sensor installation surface parallel to the measured target surface; please refer to the rotation diagram for installation methods. If other installation methods are required, please refer to the schematic diagram of "Product Installation Method" and make a note when ordering.
Application Scenarios
FAQ
T70-H 是一款 双轴数字倾斜传感器 由Micro-Magic Inc.高科技公司研发，集成工业标准RTU Modbus和0x68十六进制协议；输出可选RS232、RS485、RS422、TTL。主要面向对产量、成本和本地化率有较高限制的应用市场。由于内置MEMS微机电系统，采用倾斜单元制造工艺，因此具有体积小、功耗低、一致性和稳定性高、抗外部电磁干扰能力强、抗冲击和抗振动能力强等优点。致力于自主研发制造国产设备，突破技术壁垒。
查看更多
T70-B系列是 双轴倾斜传感器 该产品适用于工业现场控制、防爆危险场所的倾斜角度测量。其内部MCU、MEMS倾斜角度模块、电源电路和输出电路均经过优化设计，以实现最佳保护性能。每件产品出厂前均经过全温域校准和补偿，以及为期两周的长期稳定性测试，以确保其在不同工况和长期测试周期下均能保持最佳性能。该产品集成了两种数字输出协议和多种输出接口。
查看更多
T70-A 是一款双轴 数字倾斜传感器 该微魔科技股份有限公司（Micro-Magic Inc Hi-Tech Company）为其微机电系统（MEMS）倾斜测量模块开发了这款产品。它采用RTU Modbus协议，其内部核心组件100%国产，包括MCU处理器、A/D转换器、电源电路、输出电路等。这克服了国内设备制造的技术壁垒，实现了自主研发。所有产品出厂前均经过校准、温度补偿以及长期老化和稳定性测试。每个环节都经过精密严谨的工序，以确保产品在不同工况和长期使用周期下的可靠性。
查看更多
T70-G系列是新一代数字小体积MEMS芯片。 倾斜传感器 由Micro-Magic Inc.高科技公司推出。该产品配备双通道地球重力倾斜单元，可测量动态重力加速度并将其转换为倾斜角度变化。因此，可以测量传感器输出相对于水平面的倾斜角和俯仰角。输出方式可选RS232、RS485、RS422、Modbus和TTL电平接口标准。由于内置MCU控制系统，传感器输出线性度经过两次校正，补偿了模拟模型因校正不足而导致的精度下降。
查看更多留言
