M3G-300-CA 3 Axis MEMS Gyroscope Angle Sensor CAN Bus IP67 for Industrial Motion Control

The M3G-300-CA is presented as a three-axis gyro angle sensor intended to measure the deflection angle of moving objects. The source describes a built-in digital signal processor using adaptive filtering, resonance suppression and temperature compensation to reduce zero-offset drift, angle-rate random walk, vibration-related interference and temperature drift.

The sensor measures rotational rates up to 300°/s. A high-speed microprocessor integrates the gyroscope’s real-time angular-rate signal to calculate angular displacement on up to three axes (X, Y and Z) simultaneously.

The industrial-grade MEMS design is described as waterproof, shock-resistant, resistant to electromagnetic interference and low-power. According to the source, magnetic-field interference does not affect yaw-angle measurement; with a selected zero-offset angle, it can serve some electronic-compass functions in magnetic environments.

  • 零件编号 :

    M3G-300
  • 订单(最小起订量) :

    1
$347.00
  • 产品描述

Product Series and Parameters

Parameter Condition M3G-300-CA-A M3G-300-CA-B M3G-300-CA-C unit
Measure axially   X/XY axis direction Y/XZ axis direction Z/YZ axis direction  
Acquisition bandwidth   >1000 >1000 >1000 Hz
Resolution   ±0.1 ±0.1 ±0.1 °/S
Nonlinear   0.1% of FS 0.1% of FS 0.1% of FS  
Dynamic precision   0.5 0.5 0.5 °
Static precision   0.1 0.1 0.1 °
Roll/Pitch   X,Y axis: ±90° (can be customized)      
    Z axis: Full 360° rotation      
Temperature compensation -45~85° Full temperature range Full temperature range Full temperature range  
Temperature drift Room temperature <±0.2 <±0.2 <±0.2 °/sec
Power-on startup time   0.5 0.5 0.5 s
Baud rate 100K–500K bps (configurable)
Output signal CAN
Mean Time Between Failures ≥45,000 hours/cycles
Impact resistance 20000g,2ms,1/2sine
Anti-vibration 10grms、10~1000Hz
Waterproof level IP67
Cable Comes standard with a 1.5-meter shielded cable (5 x 0.2 mm²) that is wear-resistant, oil-resistant, and suitable for a wide temperature range.
Weight 180g (excluding packaging box)
Connector 6-pin aviation plug
Capacitive load 1000

Production process


Product dimension

MEMS Inertial Sensor


Application Scenarios

MEMS Gyroscope application

The M3G-300 is a high-reliability, cost-effective three-axis MEMS gyroscope assembly that outputs 3D angular velocity, temperature, and fault-diagnosis data via RS-422, designed for high-precision attitude/rotation sensing in low- and medium-orbit satellite navigation and stabilization control.

Contact Us
quartz accelerometer for Aerospace
Aerospace
quartz accelerometer for Aviation
Aviation
quartz accelerometer for Weapon
Weapon

FAQ

Q1: What does the M3G-300-CA measure?
A: The M3G-300-CA is a MEMS gyroscope-based angle sensor that measures angular displacement by integrating rotational rate signals. It supports angle measurement on up to three axes.

Q2: What is the maximum rotational rate?
A: The maximum supported rotational rate is 300°/s. Exceeding this limit may increase measurement errors.

Q3: What are the angle measurement ranges?
A: The standard X- and Y-axis angle ranges are ±90°. The Z-axis supports ±180°, with a 360° output option available. Please specify your required configuration when ordering.

留言
如果您对我们的产品感兴趣并想了解更多详情,请在此留言,我们会尽快回复您。

相关产品

M3G-220 高精度 MEMS 三轴陀螺仪

M3G-220 MEMS三轴陀螺仪组件是一款高可靠性、高性价比的三轴MEMS陀螺仪组件,专为低轨道和中轨道卫星的导航和控制应用而设计。M3G-220系列三轴陀螺仪组件将高性能MEMS陀螺仪集成于独立结构中。该系统使用的陀螺仪代表了国产MEMS惯性器件技术的领先水平。系统内所有电子元件均为100%国产。三轴MEMS陀螺仪可感知载体的角运动,系统内部可对所有温度参数下的零点位置误差、比例因子误差和非正交误差进行补偿,从而在长时间运行中保持高测量精度。

查看更多
M3G-210 高精度 MEMS 三轴陀螺仪(兼容 STIM210)

M3G-210 MEMS三轴陀螺仪是一款高可靠性、高性价比的三轴MEMS陀螺仪组件,广泛应用于导航、控制等领域,尤其适用于稳定性控制。M3G-210系列三轴陀螺仪组件将高性能MEMS陀螺仪集成于独立结构中。该系统选用的陀螺仪代表了国内MEMS惯性器件技术的最高水平。系统内所有电子元件均为100%国产。该系统可在所有温度参数下对三轴MEMS陀螺仪的零点偏差、比例因子误差和非正交误差进行内部补偿,从而长期保持高测量精度。

查看更多
M-QMG07 高精度 MEMS 单轴陀螺仪

M-QMG07-XXX 陀螺仪是一款 单轴电容式MEMS陀螺仪该陀螺仪主要由全硅MEMS传感结构和低功耗信号处理ASIC组成。M-QMG07-XXX陀螺仪采用单电源供电,典型功耗极低。输出数字信号为SPI模式。产品封装采用标准LCC20陶瓷封装,共20引脚。产品重量为0.60±0.02克。

查看更多
MG-404 精密 MEMS 速率陀螺仪

MG-404 单轴陀螺仪 是Micro-Magic公司推出的一款高精度MEMS单轴陀螺仪产品。该产品采用小体积陶瓷封装,具有精度高、量程宽、抗冲击性强、工作温度范围广、全数字输出等特点。主要应用于惯性导航、综合导航、姿态参考系统(AHRS)、平台稳定系统、无人机飞行控制等领域。

查看更多
MG-403 单轴陀螺仪模块

MG-403 单轴陀螺仪 是Micro-Magic公司推出的一款高精度MEMS单轴陀螺仪产品。该产品采用小体积陶瓷封装,具有精度高、量程宽、抗冲击性强、工作温度范围广、全数字输出等特点。主要应用于惯性导航、综合导航、姿态参考系统(AHRS)、平台稳定系统、无人机飞行控制等领域。

查看更多
高精度MEMS单轴陀螺仪MG-401

MG-401 单轴陀螺仪 是Micro-Magic公司推出的一款高精度MEMS单轴陀螺仪产品。该产品采用小体积陶瓷封装,具有精度高、量程宽、抗冲击性强、工作温度范围广、全数字输出等特点。主要应用于惯性导航、综合导航、姿态参考系统(AHRS)、平台稳定系统、无人机飞行控制等领域。

查看更多
MG-503系列数字单轴MEMS陀螺仪

MG-503 单轴陀螺仪 是Micro-Magic公司推出的一款高精度MEMS单轴陀螺仪产品。该产品采用小体积陶瓷封装,具有精度高、量程宽、抗冲击性强、工作温度范围广、全数字输出等特点。主要应用于惯性导航、综合导航、姿态参考系统(AHRS)、平台稳定系统、无人机飞行控制等领域。

查看更多
MG-501 高精度 MEMS 单轴陀螺仪传感器

MG-501 单轴陀螺仪 是Micro-Magic公司推出的一款高精度MEMS单轴陀螺仪产品。该产品采用小体积陶瓷封装,具有精度高、量程宽、抗冲击性强、工作温度范围广、全数字输出等特点。主要应用于惯性导航、综合导航、姿态参考系统(AHRS)、平台稳定系统、无人机飞行控制等领域。

查看更多

留言

留言
如果您对我们的产品感兴趣并想了解更多详情,请在此留言,我们会尽快回复您。

家

产品

whatsApp

接触

购物车
item.name
[[ item.product_name ]]
[[ line.text ]]
[[ item.delivery_text ]]
* [[ item.qty ]]
Your Cart Is Empty!