single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.
零件编号 :
MG-10800订单（最小起订量） :
1Product Series and Parameters
| Parameters | MG-10800 | Notes |
| Measurement Range | 10800 | Clockwise rotation is positive output,Clamped at ±105%FS during over-range |
| Resolution | 24bit | |
| Data Rate | 12K | Refresh rate of the output data at room temperature |
| Group delay | <1.5 | Time delay between the physical input and the output signal |
| Bandwidth (-3dB) | 100 | Defined as the frequency for which attenuation is >-3dB |
| Scale Factor at 25°C | 720 | factory setting |
| Scale Factor Repeatability (1σ ) | <50 | day by day at setting Temp(1σ ) |
| Scale Factor VS Temperature (1σ ) | <1000 | Over temperature range（1σ） |
| Scale Factor Non-Linearity (1σ ) | <100 | Percentage of dynamic range using a best straight line fit |
| Bias Instability | <1 | Allan Variance @25°C |
| Bias stability @10s | <10 | 10s smooth GJB |
| Bias stability @1s | <20 | 1s smooth GJB |
| Angular Random Walk | <1 | Allan Variance @25°C |
| Bias error over temperature (1σ ) | 10 | Over temperature range（1σ） |
| Bias temperature variations, calibrated (1σ ) | 5 | Over temperature range（1σ） |
| Bias Run-Run (1σ ) | <5 | day by day at setting Temp(1σ ) |
| Noise Peak to Peak | <1.6 | Over the Bandwidth frequency range, at room temperature |
| g Sensitivity | <1 | Any axis，Tested over ±1g |
| VRE | <1 | （12gRMS，20-2000） |
| Startup Time | 750m | Time to operational output |
| Sensor Resonant Frequency | 10.5k-13.5K | Gyroscopic resonant frequency |
| Environment, Power and Physical | ||
| Shock (operating) | 500g，1ms | |
| Shock (survival) | 10000g，10ms (except 3000g for MG-10800) | |
| Vibration Operating | 18grms，Screen spectrum | |
| Operating Temperature | -40 ~ +85（can be customized to -55 deg） | |
| Max storage (survival) Temperature | -55 ~ +125 | |
| Supply voltage | 5±0.25V | |
| Current consumption | 45ma | |
Packaging information
MG-XXXX adopts 48 pin ceramic packaging
Figure 1 Packaging Diagram
Figure 2 Packaging Size Diagram
Rotation axis
Figure 3 Schematic diagram of axial rotation detection
MG-XXXX is a single axis high-performance gyroscope that detects the rotation axis perpendicular to the surface of the chip.
Rotate counterclockwise along the rotation axis in the positive direction and clockwise along the rotation axis in the negative direction.
Application Scenarios
The MG501 is a high-performance single-axis MEMS gyroscope that outputs angular velocity and temperature data via SPI, suitable for high-precision rotational measurement and applications such as inertial navigation and attitude stabilization.
M3G-220 MEMS三轴陀螺仪组件是一款高可靠性、高性价比的三轴MEMS陀螺仪组件，专为低轨道和中轨道卫星的导航和控制应用而设计。M3G-220系列三轴陀螺仪组件将高性能MEMS陀螺仪集成于独立结构中。该系统使用的陀螺仪代表了国产MEMS惯性器件技术的领先水平。系统内所有电子元件均为100%国产。三轴MEMS陀螺仪可感知载体的角运动，系统内部可对所有温度参数下的零点位置误差、比例因子误差和非正交误差进行补偿，从而在长时间运行中保持高测量精度。
查看更多
M3G-210 MEMS三轴陀螺仪是一款高可靠性、高性价比的三轴MEMS陀螺仪组件，广泛应用于导航、控制等领域，尤其适用于稳定性控制。M3G-210系列三轴陀螺仪组件将高性能MEMS陀螺仪集成于独立结构中。该系统选用的陀螺仪代表了国内MEMS惯性器件技术的最高水平。系统内所有电子元件均为100%国产。该系统可在所有温度参数下对三轴MEMS陀螺仪的零点偏差、比例因子误差和非正交误差进行内部补偿，从而长期保持高测量精度。
查看更多
M-QMG07-XXX 陀螺仪是一款 单轴电容式MEMS陀螺仪该陀螺仪主要由全硅MEMS传感结构和低功耗信号处理ASIC组成。M-QMG07-XXX陀螺仪采用单电源供电，典型功耗极低。输出数字信号为SPI模式。产品封装采用标准LCC20陶瓷封装，共20引脚。产品重量为0.60±0.02克。
查看更多
MG-404 单轴陀螺仪 是Micro-Magic公司推出的一款高精度MEMS单轴陀螺仪产品。该产品采用小体积陶瓷封装，具有精度高、量程宽、抗冲击性强、工作温度范围广、全数字输出等特点。主要应用于惯性导航、综合导航、姿态参考系统（AHRS）、平台稳定系统、无人机飞行控制等领域。
查看更多
MG-403 单轴陀螺仪 是Micro-Magic公司推出的一款高精度MEMS单轴陀螺仪产品。该产品采用小体积陶瓷封装，具有精度高、量程宽、抗冲击性强、工作温度范围广、全数字输出等特点。主要应用于惯性导航、综合导航、姿态参考系统（AHRS）、平台稳定系统、无人机飞行控制等领域。
查看更多
MG-401 单轴陀螺仪 是Micro-Magic公司推出的一款高精度MEMS单轴陀螺仪产品。该产品采用小体积陶瓷封装，具有精度高、量程宽、抗冲击性强、工作温度范围广、全数字输出等特点。主要应用于惯性导航、综合导航、姿态参考系统（AHRS）、平台稳定系统、无人机飞行控制等领域。
查看更多
MG-503 单轴陀螺仪 是Micro-Magic公司推出的一款高精度MEMS单轴陀螺仪产品。该产品采用小体积陶瓷封装，具有精度高、量程宽、抗冲击性强、工作温度范围广、全数字输出等特点。主要应用于惯性导航、综合导航、姿态参考系统（AHRS）、平台稳定系统、无人机飞行控制等领域。
查看更多
MG-501 单轴陀螺仪 是Micro-Magic公司推出的一款高精度MEMS单轴陀螺仪产品。该产品采用小体积陶瓷封装，具有精度高、量程宽、抗冲击性强、工作温度范围广、全数字输出等特点。主要应用于惯性导航、综合导航、姿态参考系统（AHRS）、平台稳定系统、无人机飞行控制等领域。
查看更多留言
