TD7-CA High Performance Dynamic MEMS Inclinometer Sensor Dual Axis Tilt Sensor

The TD7 is a new generation high-performance tilt sensor launched by Micro-Magic Inc, which can maintain high precision in complex movements with a small size. It has a dynamic measurement accuracy of 0.3°, a stable accuracy of 0.05°, and a temperature drift of 0.01°/℃. The output interfaces RS232, RS485, RS422, Modbus, TTL, and CAN buses are optional, making it easy to integrate into user control systems.

零件编号 :
TD7-CA
订单（最小起订量） :
1
leading time :
4

$284.00 $284.00

产品描述

Product Series and Parameters

Parameter	Conditions	TD7-CA				Unit
Measuring axis	axis	X, Y	X, Y	X, Y	X, Y
Measuring range		±10	±30	±60	±90	°
Zero temperature drift	-40～85°	±0.05	±0.05	±0.05	±0.05	°
Sensitivity temperature coefficient	-40～85°	≤150	≤150	≤150	≤150	ppm/℃
Frequency response	DC response	100	100	100	100	Hz
Static accuracy	-40～85°	0.05	0.05	0.05	0.05	°
Dynamic accuracy	-40～85°	0.3	0.3	0.3	0.3	°
Long term stability	-40～85°	<0.35				°
Power-on start time		0.2				s
Response time		0.01				s
Baud rate	100K~500K bps can be set (customization required for others)
Output signal	CAN, CANopen
Average working hours	≥55000 hours/time
Impact resistance	25000g, 0.5ms, 3 times/axis
Anti-vibration	10grms、10～1000Hz
Insulation resistance	≥100MΩ
Waterproof level	IP67
Cable	Standard 1.5 meter-length, wear-resistant, oil-proof, wide temperature, shielded cable 6*0.3mm2
Weight	75g (excluding packaging box)

Production process

More similar products

Product dimension

Application Scenarios

Inclination Sensor application

The TD7-DI is a high-performance industrial-grade dual-axis dynamic inclinometer designed for precise tilt measurement in complex motion and vibration environments. Integrating a vertical gyroscope and accelerometer with advanced N-order Kalman filtering and multi-compensation algorithms, it ensures stable and accurate attitude output even under dynamic conditions. With 0.05° static accuracy and 0.3° dynamic accuracy, along with ultra-low temperature drift (0.01°/℃), it delivers superior precision and long-term stability. Supporting multiple interfaces (RS232/RS485/RS422/TTL/CAN/Modbus), wide voltage input (5V or 9–36V), and IP67 protection across -40 to +85°C environments, it is ideal for railway leveling, bridge monitoring, precision machinery, antenna positioning, and industrial automation applications.

Railway and Bridge Monitoring

Construction and Gimbal Leveling

Autonomous Driving

FAQ

Q1:What is the main advantage of this inclinometer?

A:The TD7-DI is a high-performance dual-axis dynamic inclinometer, designed to maintain stable and accurate angle output even under vibration and motion conditions.

Q2:What is the accuracy of this sensor?

A:Static accuracy: 0.05°

Dynamic accuracy: 0.3°

This makes it more precise than standard dynamic tilt sensors.

Q3:What makes it suitable for dynamic environments?

A:The sensor integrates:

Gyroscope + accelerometer fusion

N-order Kalman filtering algorithm

Advanced digital noise reduction

This ensures stable measurement in strong vibration and motion scenarios.

热门标签 :

倾斜传感器

倾斜传感器供应商

倾斜传感器工厂

倾斜传感器研讨会

倾斜传感器工厂

倾斜传感器制造商

留言

如果您对我们的产品感兴趣并想了解更多详情，请在此留言，我们会尽快回复您。

相关产品

高精度三轴MEMS倾角传感器动态静态倾斜传感器

TD9-DI 是由 Micro-Magic 公司自主研发的高精度倾斜角度测量模块，是一款数字式三轴 X、Y、Z 倾斜角度传感器（简称“倾斜角度传感器”）。它集成了工业标准的 RTU Modbus 和 0x68 十六进制协议；配套的计算机分析软件可以实时显示和记录测量数据，方便分析。该传感器国产化率超过 85%，其核心组件包括 MCU 微控制器、高精度 16 位 A/D 模块、温度传感器、信号处理器、电源电路、输出电路等。其目标是实现国产化生产，克服自主研发技术的障碍。

高性能动态MEMS倾角仪传感器双轴倾斜传感器

TD7-DI是Micro-Magic公司推出的新一代高性能倾斜传感器，它体积小巧，却能在复杂的运动中保持高精度。其动态测量精度为0.3°，稳定测量精度为0.05°，温度漂移为0.01°/℃。输出接口可选RS232、RS485、RS422、Modbus、TTL和CAN总线，方便用户集成到控制系统中。

动态MEMS倾角仪传感器双轴倾斜传感器

TD6-DI是一款新一代MEMS动态倾斜传感器，可测量运动载体或强振动状态下的倾斜数据。其动态测量精度为0.5°，静态测量精度为0.06°，具有体积小、功耗低、一致性和稳定性高等优点，输出接口可选RS232、RS485、RS422、Modbus、TTL、CAN；内置MCU控制系统、垂直陀螺仪和加速度计，集成姿态解算器，采用最优数字滤波算法降低噪声，并结合N阶卡尔曼滤波算法，通过非线性补偿、正交补偿、温度漂移补偿等多种补偿方式消除误差源，提高测量精度。

三轴MEMS倾角仪传感器动态静态倾斜传感器

TD5-DI 是由 Micro-Magic 公司自主研发的三轴 X、Y、Z 方向数字倾斜角传感器（简称“倾斜角传感器”），用于元件倾斜角测量模块。它集成了工业标准的 RTU Modbus 和 0x68 十六进制协议；国产元件占比超过 85%，内部核心元件包括 MCU 微控制器、AD 模块、信号处理器、电源电路、输出电路等。该产品旨在实现国产化生产，克服自主研发技术的障碍。